2021 hot selling and popular cargo tricycle models with 300CC engine

2021 hot selling and popular cargo tricycle models with 300CC engine, 50*100 keel frame, 40*80 rear flat frame,

built-in 5+2 steel plate, 2m*1.3m large engineering cold plate cargo compartment,

semi-buoyant afterburner 60 bridge pipe, front and rear 4.5-12 ordinary Tires,

Special shock absorption for mountain travel

DAYANG tricycles reference car design principles, from the frame structure to optimize the design, to make smaller vehicle driving vibration, lower noise, stronger stability!

As for the tricycle turn, the DAYANG tricycle with precise design on the angle of tricycle riser and fixture to ensure that steering is flexible and portable, driving at 80 yards still don’t run away, won’t pendulum!

 Verification of motorcycle riders

a) In addition to the driver of the two wheeled motorcycle, one more person can take the motorcycle with a fixed seat;

b) In addition to the driver of the side tricycle, one person shall take the main motorcycle and one person shall take the side motorcycle with fixed seats;

c) One approved passenger in the cab of a regular tricycle; When there are fixed seats arranged longitudinally (in the same direction as the forward direction of the motor vehicle) in the compartment (the cushion depth of the fixed seat shall not be less than 400 mm and the distance between the fixed seat and the driver's seat shall not be less than 650 mm), one person shall be checked for every 400 mm of the cushion width, but the maximum number shall not exceed 2; If the above conditions are not met, the carriage shall not be used for passengers;

d) One authorized rider of moped.

The cargo box shall be installed firmly and reliably, and the breast board and floor of the cargo box shall be regular and have sufficient strength.

1、 The allowable deviation of the center plane of the front and rear wheels of the main vehicle of two wheeled motorcycles, two wheeled mopeds 、cargo box and side three wheeled motorcycles shall not exceed 10 mm.

2、Passenger cars shall be equipped with wheel guards, the rear wheels of trailers shall be equipped with mudguards, and all wheels of other motor vehicles shall be equipped with mudguards./3 Motor vehicles 3、shall be equipped with plate (frame) that can meet the requirements for plate installation. The front number plate (frame) shall be set in the middle or right side of the front (according to the direction of the motor vehicle), and the rear number plate (frame) shall be set in the middle or cargo box  left side of the back。