Semi cabin cargo tricycle with powerful engine of 250cc
Semi cabin cargo tricycle with powerful engine of 250cc water colling
50*100 double-layer frame, can be connected to the wheel with a distance of 1700,
with a side of 750, a beam of 1050, split one and a half rows,cargo size :2.6*1.5m,
full floating 168 speed ratio 10:37, 6+ 4 leaf springs, 5 speeds, with balance bar, positioning 860. Yuanxing tires 5.00-12 front and rear
DAYANG tricycles reference car design principles, from the frame structure to optimize the design, to make smaller vehicle driving vibration, lower noise, stronger stability!
As for the tricycle turn, the DAYANG tricycle with precise design on the angle of tricycle riser and fixture to ensure that steering is flexible and portable, driving at 80 yards still don’t run away, won’t pendulum!
Verification of motorcycle riders
a) In addition to the driver of the two wheeled motorcycle, one more person can take the motorcycle with a fixed seat;
b) In addition to the driver of the side tricycle, one person shall take the main motorcycle and one person shall take the side motorcycle with fixed seats;
c) One approved passenger in the cab of a regular tricycle; When there are fixed seats arranged longitudinally (in the same direction as the forward direction of the motor vehicle) in the compartment (the cushion depth of the fixed seat shall not be less than 400 mm and the distance between the fixed seat and the driver's seat shall not be less than 650 mm), one person shall be checked for every 400 mm of the cushion width, but the maximum number shall not exceed 2; If the above conditions are not met, the carriage shall not be used for passengers;
d) One authorized rider of moped.
The cargo box or other cargo carrying device of a motor vehicle must be so constructed that it can safely and securely load goods.
1、 A safety frame at least 70mm higher than the cab shall be installed at the front of the cargo box of trucks (except dump trucks, trucks with a load capacity of less than 1000 kg, and tricycles).
2、The front of the cargo box of a three wheel truck without a cab shall be equipped with a safety frame with strength meeting the requirements, and its height cargo shall be at least 800mm higher than the driver's seat cushion plane.
3、 For the van in which the driver and cargo goods are in the same compartment, the isolation device with strength meeting the requirements shall be installed behind the last row of seats.