Hot selling cargo tricycle models in Angola with 150cc engine
Hot selling cargo tricycle models in Angola with 150cc engine, 40*80 keel frame, 1.8m*1.3m northern rolling cargo compartment,
Changan small afterburner belt full float, front and rear ordinary 5.0 three-wheel 150cc interchange,
50 types of shock absorption with outer spring, 150cc with front Fixed bumper, 9A battery
The appearance of the motor tricycle
The appearance of the motor tricycle shall be clean, all parts and components shall be intact, and the connection shall be firm without defects.
The tricycle body shall be upright, and the height difference between the left and right symmetrical parts of the outer edge of the tricycle body shall not exceed 40 mm.
The height difference between the left and right symmetrical parts of the cab and compartment of a regular tricycle and the ground shall not be greater than 20 mm.
Seat cushion, handrail (or strap) and pedal shall be set for the passenger seat of the main vehicle of two wheel motorcycle and side three wheel motorcycle.
The hot surfaces of tricycles that may be touched during normal startup and operation according to the product instructions and whose temperature is greater than 80 ℃ measured at an ambient temperature of (23 ± 3) ℃ shall be equipped with permanently connected or fixed protective devices or baffles (which cannot be removed without tools).
The cargo box or other cargo carrying device of a motor vehicle must be so constructed that it can safely and securely load goods.
1、 A safety frame at least 70mm higher than the cab shall be installed at the front of the cargo box of trucks (except dump trucks, trucks with a load capacity of less than 1000 kg, and tricycles).
2、The front of the cargo box of a three wheel truck without a cab shall be equipped with a safety frame with strength meeting the requirements, and its height cargo shall be at least 800mm higher than the driver's seat cushion plane.
3、 For the van in which the driver and cargo goods are in the same compartment, the isolation device with strength meeting the requirements shall be installed behind the last row of seats.