200CC Cargo Tricycle Delivery Van with Rear Canvas Cover for Outdoor Raining Areas

Enclosed Cargo tricycle with powerful engine of 250cc/300cc/800cc/1000cc

Enclosed Cargo tricycle with powerful engine of 250cc/300cc/800cc/1000cc, 8+1 gearbox, three-in-one vacuum booster brake,

50*100*3.5 overall frame, 290 heavy duty king oil brake front fork (Hebei),

198 car 70 bridge tube cross-country rear axle , Φ250 rear brake drum,

three-wheel agricultural oil brake, 6+3 red steel plate (850 groove type), 

automobile all-aluminum radiator, large project with 2.4*1.5m 400mm high cold plate,

luxury automobile interior, split type Seat, 6.0 ordinary, rack type steering gear

If an internal combustion engine is used, its cylinder displacement is greater than 50mL, or regardless of the driving mode, its maximum design speed is greater than 50km/h. Including two wheeled motorcycles, side three wheeled motorcycles and regular three wheeled motorcycles (side three wheeled motorcycles and regular three wheeled motorcycles can be collectively referred to as three wheeled motorcycles)

 The steering wheel (steering handle), gear lever, pedal, handle, switch and other operating mechanisms of three wheel vehicles and low-speed trucks equipped with single cylinder diesel engines shall be clearly marked with durability marks on or near the operating mechanisms, except for those with very clear functions. The operating symbols used for signs shall have obvious color difference with the background. The product operation manual shall provide easy to understand and detailed operation instructions for all operating mechanisms.

The cargo box or other cargo carrying device of a motor vehicle must be so constructed that it can safely and securely load goods.

1、 A safety frame at least 70mm higher than the cab shall be installed at the front of the cargo box of trucks (except dump trucks, trucks with a load capacity of less than 1000 kg, and tricycles).

2、The front of the cargo box of a three wheel truck without a cab shall be equipped with a safety frame with strength meeting the requirements, and its height  cargo shall be at least 800mm higher than the driver's seat cushion plane.

3、 For the van in which the driver and  cargo goods are in the same compartment, the isolation device with strength meeting the requirements shall be installed behind the last row of seats.

Three wheeled vehicles and low-speed truck shall be designed to ensure that the driving speed of the motor vehicle will not exceed the requirements of its maximum design speed in the actual use process, and the above motor vehicles with belt transmission devices shall be permanently engraved on the visible parts of the frame to indicate the pulley diameter.