2015 best selling heavy load THREE wheel motorcycle trikes 200cc trike with cheap price

If an internal combustion engine is used, its cylinder displacement is greater than 50mL, or regardless of the driving mode, its maximum design speed is greater than 50km/h. Including two wheeled motorcycles, side three wheeled motorcycles and regular three wheeled motorcycles (side three wheeled motorcycles and regular three wheeled motorcycles can be collectively referred to as three wheeled motorcycles)

Ensure the safety of electric  3 wheel tricycle

After the battery of electric 3 wheel tricycle is discharged to the terminal voltage, it is called over discharge. Overdischarge will seriously damage the battery of electric 3 wheel  tricycle, which is extremely unfavorable to the electrical performance and cycle life of electric 3 wheel tricycle battery. On the whole, consumers should not judge whether a car is good or bad only by price, mileage and other factors when purchasing an electric  3wheel tricycle. It is also important to check whether the line materials and parts are in good contact. In addition, the battery must not be short circuited. Special care should be taken during installation or use. All tools used should take insulation measures. When connecting, the electrical appliances other than the battery should be connected first. After checking, there should be no short circuit. Finally, the battery of the electric  3 wheel tricycle should be connected. The wiring specification should be good insulation to prevent overlapping compression from cracking. Only in this way can the electric 3 wheel tricycle be safer and used longer.

1. The annual production capacity of three wheel motorcycles is 150,000.

2. As of 2020, the market value of Dayang has exceeded 25.1 billion, making it one of China's top 500 most valuable brands.

3. The company adheres to the business tenet of "quality first, customer first, fair competition, and benefiting society", and comprehensively carries out quality management activities.

The cargo box shall be installed firmly and reliably, and the breast board and floor of the cargo box shall be regular and have sufficient strength.

1、 The allowable deviation of the center plane of the front and rear wheels of the main vehicle of two wheeled motorcycles, two wheeled mopeds 、cargo box and side three wheeled motorcycles shall not exceed 10 mm.

2、Passenger cars shall be equipped with wheel guards, the rear wheels of trailers shall be equipped with mudguards, and all wheels of other motor vehicles shall be equipped with mudguards./3 Motor vehicles 3、shall be equipped with plate (frame) that can meet the requirements for plate installation. The front number plate (frame) shall be set in the middle or right side of the front (according to the direction of the motor vehicle), and the rear number plate (frame) shall be set in the middle or cargo box  left side of the back。