Open Body Heightening Carriage Cargo Motor Tricycle With Differential Axle for Adult Heavy load

Cargo Motor Tricycle Reocmmended Reasons:

• High quality double spring shock absorber cargo motor tricycles with heitenning carriage can load more goods.
• Higher capaclity fuel tank with Luxurious backrest, Newly design
• Boosting differential rear axle can help the adult tricycle to carry heavy goods on rough roads
• specialised 200cc water cooling model engine provides bigger power and ratio

3 wheel  tricycle specific product advantages:

To solve the fracture of engine cylinder head bolts:

1. The cylinder head bolt is thickened from 8M to 10M

2. The muffler is designed in 3 sections to reduce the range of engine vibration

3. Increase fixed points to make the vibration more stable.

3 wheel  tricycle fan, controlled in two ways:

1. There are separate independent switches.

2. When the water temperature reaches more than 70 degrees, the fan will turn on automatically.

3. Avoid water temperature rise caused by forgetting to open the switch 3 wheel  tricycle.

The steering wheels of motor vehicles shall not be equipped with retreaded tyres.

1 The tyres used for motor vehicles shall be suitable for their maximum design speed.

2 The tires of dual wheels shall be installed to facilitate tire inflation, and there shall be no foreign matters between tires of dual wheels.

3 The tire load shall not be greater than the rated load of the tire, and the tire pressure shall conform to the specified pressure when the tire bears the load. For the vehicle with automatic inflation device for tire pressure, the automatic inflation device shall ensure that the tire pressure complies with the regulations of the vehicle manufacturer.

4 Lateral runout and radial runout of wheel assembly

The total mass of a vehicle less than or equal to 4500 kg shall not be greater than 5 mm; The motorcycle shall not exceed 3 mm; Other motor vehicles shall not exceed 8 mm.

5 For motor vehicles with the maximum design speed greater than 100 km/h, the dynamic balance requirements of their wheels shall comply with the provisions of relevant technical conditions.

Car structure design:

1. The edge plate is rolled integrally.

2. Small parts such as side plate guardrail are formed at one time, and the overall type is better.

3. The longitudinal beam of the bottom plate is thickened, and the welding is strengthened, so the bearing capacity is stronger.

4. All small parts are molded.

5. Assembly line welding, tooling accurate positioning.

6. The car is polished beautifully and the car is glued.

7. The leakage hole is designed to prevent rainwater from accumulating for a long time