Three wheel cargo hydraulic

Attributes

Three wheel cargo hydraulic

Quality

1. Innovation

DAYANG three-wheeled vehicles are designed with innovation in mind. The vehicles are equipped with advanced features, such as the latest in electric motor technology, to ensure that they are both efficient and reliable.

2. Electric Motor

The vehicles are powered by an advanced electric motor that provides efficient and reliable power. The motor is designed to be both powerful and efficient, ensuring that the vehicles are both fast and economical to operate.

3. Battery

The battery used in the vehicles is of the highest quality, ensuring maximum power and reliability. The battery is designed to provide long-lasting power, ensuring that the vehicles can travel long distances on a single charge.

Three wheel cargo hydraulic

Front brake handle
The front brake handle is on the right side of the steering handle (as shown in Figure 7), and holding it towards the fuel dispenser can brake the front wheels
 

Handbrake
The handbrake is installed below the left side of the driver's seat cushion (as shown in Figure 8). The handbrake has the functions of braking and parking. When braking or parking, especially in sloping areas, press the handbrake control arm forward to make it snap into the limit slot, and then return to its original position for normal driving.
 

Transmission pedal
The transmission pedal is located on the left side of the driver (as shown in Figure 9) and plays a shifting role. When starting the engine, the transmission pedal is in the neutral position. When shifting, reduce the engine speed and release the clutch. Step on the transmission to the first gear position, gradually increase the generator speed, and slowly release the clutch handle to ensure natural starting. The same method can be used for other gears.
 

Reverse gear lever
The reverse gear lever is installed on the reverse gear on the left side of the engine (as shown in Figure 9). Pulling it backwards indicates reverse gear, and facing forward indicates forward gear. (Note: Parking is required for reverse gear operation)
Starting arm ① Starting arm ② Rear brake pedal
The starting arm is installed on the right side of the engine (as shown in Figure 10), and the clutch is disengaged when starting the engine. In the neutral position, press down on the starting arm to start the engine.

Three wheel cargo hydraulic

To solve the problem of engine cylinder head bolt breakage:

1. Cylinder head bolts are thickened from 8M to 10M
2. The muffler adopts a three stage design to reduce the range of engine vibration impact
3. Add fixed points for smoother vibration.
 

Fan, controlled in two ways:
1. There are separate independent switches.
2. When the water temperature reaches over 70 degrees, the fan automatically turns on.
3. Avoid water temperature rise caused by forgetting to turn on the switch.