2021 hot selling and popular cargo tricycle models with 300CC engine

2021 hot selling and popular cargo tricycle models with 300CC engine, 50*100 keel frame, 40*80 rear flat frame,

built-in 5+2 steel plate, 2m*1.3m large engineering cold plate cargo compartment,

semi-buoyant afterburner 60 bridge pipe, front and rear 4.5-12 ordinary Tires,

Special shock absorption for mountain travel

DAYANG tricycle reference car design principles, from the frame structure to optimize the design, to make smaller vehicle driving vibration, lower noise, stronger stability!

As for the tricycle turn, the DAYANG tricycle with precise design on the angle of tricycle riser and fixture to ensure that steering is flexible and portable, driving at 80 yards still don’t run away, won’t pendulum!

DAYANG tricycle open the industry precedent, Innovation using the golden section method to precisely design the position of the brake linkage rod position to make sure excellent braking effect and higher safety factor. 

The cargo box or other cargo carrying device of a motor vehicle must be so constructed that it can safely and securely load goods.

1、 A safety frame at least 70mm higher than the cab shall be installed at the front of the cargo box of trucks (except dump trucks, trucks with a load capacity of less than 1000 kg, and tricycles).

2、The front of the cargo box of a three wheel truck without a cab shall be equipped with a safety frame with strength meeting the requirements, and its height  cargo shall be at least 800mm higher than the driver's seat cushion plane.

3、 For the van in which the driver and  cargo goods are in the same compartment, the isolation device with strength meeting the requirements shall be installed behind the last row of seats.

Three wheeled vehicles and low-speed truck shall be designed to ensure that the driving speed of the motor vehicle will not exceed the requirements of its maximum design speed in the actual use process, and the above motor vehicles with belt transmission devices shall be permanently engraved on the visible parts of the frame to indicate the pulley diameter.